Product Description
| Model NO. |
RT-LD-2707 |
Material |
Acrylic, Polyurethane, Silicon |
| Usage Method |
Brush, Roller, Spray |
Transport Package |
Plastic Bucket |
| Specification |
60*60*80mm |
Trademark |
RUNTAI |
| Origin |
Linyi, Shandong, China |
HS Code |
3208909090 |
| Production Capacity |
500000/Year |
Substrate |
Various cement walls |
Detailed Photos
Four core technologies
Addressing fundamental issues such as voids and cracks in concrete, improving its lifespan, enhancing its resistance to chemical corrosion, physical damage, and microbial erosion.
Product Parameters
1. Temperature control and crystal self-healing technology
D004 has the functions of reducing the early hydration heat of concrete, enhancing the self compacting ability of concrete, and making concrete self compacting, anti-seepage, and anti-corrosion in the later stage.
D009 uses nano microbeads as the main raw material to balance the temperature difference between indoor and outdoor areas and prevent wall sweating and condensation.
2. Permeable nano silicon ion modification technology
D005 utilizes nano silicon ion technology to add penetrating agents, integration agents, etc. to penetrate the interior of concrete by 10-50mm, producing calcium silicate colloids to block fine seam channels, making large seams smaller and cracks within 0.4mm self heal.
3. Nano superhydrophobic modification technology of non-polar minerals
D006/D008 crystal powder is a combination of nanoscale superhydrophobic materials and inorganic alloy substances. The microcrystals guide the superhydrophobic capillary channels, block external moisture intrusion, improve the frost resistance, crack resistance, corrosion resistance, and moisture resistance of mortar and concrete, and achieve the magical effect of lotus leaf hydrophobic effect and no leakage.
4. Polymer lotion
D007 superfine lotion polymerization technology: focusing on the cement-based lotion series, it is a wear-resistant and impact resistant polymer cement-based coating, which can be used in the basement without protective layer, and can also be used on the exposed roof, with good anti-corrosion performance.
Product performance
D004 nano silicon ion structure self-healing
This product is a self-healing inorganic nano scale permeable material containing components such as nano active silicon ions, hydration heat inhibitors, regulators, and air entraining agents.
Product Features
1) Anti cracking; 2) Impermeability; 3) Easy to use; 4) Self-healing; 5) Durability
Product Code: RT-LD-2604 Product Specification: 18KG
D005 silicon ion high permeability protective solution
This product is a solution made by mixing and reacting alkali metal silicate solution as the base material, adding catalyst and penetrant. It can penetrate into concrete by 10-50mm and produce a branched calcium silicate colloid with alkali in concrete. It fills the voids of concrete, embeds into the capillary pores of concrete, seals fine cracks below 0.5mm, and greatly enhances the compactness and compressive strength of concrete structural layers.
Product Features
1) Permanent multiple protection; 2) Add anti-seepage sealing function; 3) Strong self-healing ability; 4) Surface reinforcement function; 5) Convenient construction, time-saving and labor-saving
Product Code: RT-LD-2600 Product Specification: 18KG
D006 composite inorganic waterproof coating
This product is a solution made by mixing and reacting alkali metal silicate solution as the base material, adding catalyst and penetrant. It can penetrate into concrete by 10-50mm and produce a branched calcium silicate colloid with alkali in concrete. It fills the voids of concrete, embeds into the capillary pores of concrete, seals fine cracks below 0.5mm, and greatly enhances the compactness and compressive strength of concrete structural layers.
The widest range of applications and the highest cost-effectiveness, it can be used on both the upstream and downstream surfaces, and can replace mortar.
Product Features
1) The construction thickness can reach 6-8mm at a time, making it easy to scrape and scrape; 2) The anti-seepage pressure is high, exceeding 1.5MPa in 28 hours; 3) 28 day strength reaches above 20MPa, wear-resistant and impact resistant; 4) Strong adhesion, no hollowing, cracking, peeling or other phenomena; 5) Construction can be carried out on both the upstream and downstream surfaces
Product Code: RT-LD-2605 Product Specification: 18KG
D007 negative pressure anti-seepage and moisture-proof function waterproof
Negative pressure impermeable and moisture-proof function Waterproof waterproof, impermeable and moisture-proof coating composed of polymer lotion with unique formula and a variety of inorganic materials
construction technology
1) Construction preparation: Before construction, quality inspection should be carried out on the base layer to remove loose layers, oil stains, dust, and other debris from the base layer; Holes, gaps, and other areas should be repaired and leveled, with a smooth surface that is prone to scratching; 2) Wetting the base surface: Water thoroughly to wet the base surface, which should be clean, damp, and free of visible water; 3) Mixing: When mixing on site, first pour the liquid material into the mixing bucket, slowly pour in the powder material while stirring, and stir thoroughly for 2-3 minutes. Only after there are no lumps can construction begin. The mixed slurry should be used up within 2 hours; 4) Layered construction: can be sprayed, brushed or roller coated, using the cross brushing method. After the first layer is dry, the second layer of construction can be carried out
Product Code: RT-LD-2707 Product Specification: 18KG
D008 Back Water Surface Anti Seepage Self Repair Special Waterproof
Anti leakage and self-healing special waterproofing of the back water surface is a corresponding waterproof, crack resistant, moisture-proof, and alkali resistant mortar made of special cement, quartz sand, and other base materials, mixed with various hydrophobic and active chemical substances
construction technology
1) Inspection of concrete structure: All concrete to be coated must be carefully inspected for structural defects, such as cracks, honeycomb and rough surfaces. Poor quality surfaces should be chiseled, cleaned, and smooth surfaces should be roughened
2) Cleaning the surface of the base layer: The surface of the base layer must be kept clean. Whether it is newly poured or existing concrete, it should be moistened with water, but there should be no visible water
3) Mixing: Mix with 20% -30% water based on the weight of the product. Mixing dosage: greater than 1.5kg/m. The specific amount of water added should be for personal spraying and scraping. After sufficient mixing for 2-3 minutes and no clumping, construction can proceed. The mixed mortar should be used up within 30 minutes, and no additional water should be added during the construction process
4) Divided into construction: can be sprayed, brushed or scraped for construction. If it is found that the local base surface is still too dry during the construction process, it must be re wetted
Product Code: RT-LD-2706 Product Specification: 18KG
D009 anti condensation and anti mold waterproof coating
Waterproof, impermeable and moisture-proof coating composed of high molecular polymer lotion formulated with unique formula and a variety of inorganic materials
Product advantages
1) Excellent thermal insulation: improves cooling and heating efficiency, cool in summer and warm in winter, with a coating thickness of 5-10mm, exhibiting excellent thermal insulation performance. 2) Inhibits condensation: reduces condensation by reducing temperature difference, achieving anti mold and anti mite effects. 3) Excellent durability: can maintain its performance and appearance for a long time. 4) Excellent sound insulation: reduces the amplitude diffusion of sound waves, achieving the effect of reducing noise. 5) Green environmental protection: uses environmentally friendly materials, the product is green and environmentally friendly
construction technology
1) Construction preparation: Before construction, quality inspection should be carried out on the base layer to remove loose layers, oil stains, dust, and other debris from the base layer; Holes, gaps, and other areas should be repaired and leveled, and smooth surfaces should be roughened; The ground and vertical surfaces at the grassroots level must be flat, solid, free from sanding, peeling, and looseness. Waterproof construction shall not be carried out on unqualified base layers.
2) Wetting the base surface: Water should be sprayed thoroughly to wet the base surface. The base surface should be clean, moist, and free of visible water. Waterproof construction shall not be carried out on unqualified base layers.
3) Mixing: When mixing mortar on site, add about 700 water per kg of mortar powder. The specific amount of water added should be comfortable for personal scraping and as little water should be added as possible. After sufficient mixing for 2-3 minutes, there should be no lumps before construction. The mixed mortar should be used up within 30 minutes, and secondary water should not be added during the construction process
4) Layered construction: The construction method adopts the plastering and pressing method, using scraper, trowel, etc. to evenly apply layer by layer. The vertical and horizontal scraping and repeated plastering should be carried out. When applying layer by layer, the thickness of the single layer should be greater than 6mm. After the previous layer of mortar is basically cured, the next layer of mortar should be applied for basement walls. The construction thickness of the top plate is 5-10mm (the thinnest part should not be less than 5mm), and during the slow setting period, it must be pressed and smoothed with mortar.
5) Curing method: The curing temperature should not be lower than 5 ° C, and the curing time should not be less than 3 days. Thin film or water spraying curing should be used no less than 2-3 times
Product Code: RT-LD-2708 Product Specification: 10KG
matters needing attention
1. The collective mortar concrete before construction requires sufficient moisture
2. Construction is more suitable when the ambient temperature is between 5 ° C and 30 ° C
3. When mixing materials, attention should be paid to mixing evenly, and there should be no dry material balls in the slurry that have not been mixed. In case of low temperature and high humidity weather, it is necessary to delay appropriately
4. Long coating maintenance time for optimal coating effect
Installation Instructions
Packaging & Shipping
Certifications
Company Profile
Shandong Runtai Import & Export Co., Ltd. aims to create a high standard in the waterproofing industry and become a better brand. It accurately positions itself as a professional service provider for building waterproofing, repair and decoration.
The company has always maintained a professional, innovative and environmentally friendly philosophy. It has won honors such as China's famous brand in the waterproofing coating industry and the preferred product of energy-saving building materials, and has won the industry contribution award many times.
The products include waterproof materials, repair and plugging materials, exterior wall imitation stone paint, interior wall art paint, decorative accessories and other series of products.
Welcome to visit our factory and look forward to cooperating with you.
FAQ
1. Q: Are You Factory Or Trading Company?
A: we are Manufacturer
2. Q: Can You Make Our Design Or Put Our Logo On The Product?
A: Yes,We support OEM&ODM. We can put your Logo on product.
3. Q: About Sample?
A:The Sample Need About 5~15 Days, And The Cost With Express Will Be Charged. But Would Be Returned After Place Order.
4.Q: About Delivery Time?
A: It needs about 15-25 Days, Depend On The Quantity. We also supply ready to ship products.
5. Q:Do You Have Discount For Bulk Order?
A:Yes,Of Course,The More You Buy,The Bigger Discount You Can Get
6. Q: Do you provide Technical & Engineering Service?
A: Yes, we specialized in waterproof materials in terms of R&D manufacturing and sales over 10 years, we have Technical support team.
){kind=link}